Re: Can someone verify this voice config please.

From: Ademola Osindero (osindero@xxxxxxxxxxxxxxxxx)
Date: Wed Nov 21 2001 - 04:07:09 GMT-3


   
Jason,

There is a good documentation on this topic on the Cisco website. It is
titled Understanding Dial Peer and Dial Plan Structures. I guess you could
search for it. It covers almost all the intricacies of Dial configuration.

Ademola

At 11:08 AM 11/20/2001 -0800, fwells12 wrote:
>I am reading Integrating Voice and Data Networks by Keagy. It is very good.
>
>
>----- Original Message -----
>From: "Jason Graun" <jgraun@theocc.com>
>To: <ccielab@groupstudy.com>
>Sent: Tuesday, November 20, 2001 11:00 AM
>Subject: RE: Can someone verify this voice config please.
>
>
> > Do You have any documentation on that feature of voice?
> >
> > Thanks
> >
> > Jason
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Andy Cuberly
> > Sent: Tuesday, November 20, 2001 8:00 AM
> > To: 'fwells12'; ccielab@groupstudy.com
> > Subject: RE: Can someone verify this voice config please.
> >
> > Almost there - You need to insert a single "." before the capital "T" in
> > the
> > destination pattern in the VOIP dial peer.
> >
> > Looks like this:
> >
> > destination-pattern .T
> >
> > Also - You need to add a valid extension number in the Pots dial peer on
> > the
> > destination pattern line.
> >
> > example:
> >
> > R1
> > dial-peer voice 1 pots
> > destination-pattern 111
> > port 1/0/0
> >
> > dial-peer voice 2 voip
> > destination-pattern .T
> > session target ipv4:x.x.x.x (IP address of R2)
> >
> >
> > The rest looks good.
> >
> > Andy Cuberly
> > CCIE #8386
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > fwells12
> > Sent: Tuesday, November 20, 2001 12:50 AM
> > To: ccielab@groupstudy.com
> > Subject: Can someone verify this voice config please.
> >
> >
> > I don't have voice access to try this. The object of the excersize is
> > to be
> > able to use any number to dial over frame-relay to another phone and
> > have
> > that
> > phone be able to dial back using any number too.
> >
> >
> > R1-----------frame-relay ------------R2
> >
> > R1
> > dial-peer voice 1 pots
> > destination-pattern T
> > port 1/0/0
> >
> > dial-peer voice 2 voip
> > destination-pattern T
> > session target ipv4:x.x.x.x
> >
> > R2
> > dial-peer voice 1 pots
> > destination-pattern T
> > port 1/0/0
> >
> > dial-peer voice 2 voip
> > destination-pattern T
> > session target ipv4:x.x.x.x
Osindero Ademola
Schlumberger Network Solutions
Tel: 234 1 261 0446 Ext 5427
Fax 234 1 262 1034
email:osindero@lagos.sns.slb.com



This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:20 GMT-3