From: chris H (chrish@xxxxxxxx)
Date: Tue Nov 20 2001 - 23:42:09 GMT-3
I use the Merge ISDN emulator too and have experienced similar issue. I
found that whenever I put in the LDN it acts strangely. It has worked fine
ever since I omitted LDN's. Try that and see what happens.
Chris Hsu
CCIE 7442
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Brian
Sent: Tuesday, November 20, 2001 7:53 PM
To: Mark.Reyero@gecits.ge.com
Cc: ccielab@groupstudy.com
Subject: Re: Merge ISDN Simulator Problem
On Tue, 20 Nov 2001 Mark.Reyero@gecits.ge.com wrote:
> Anyone out there have any experience with a Merge 2000 ISDN simulator.
I've
> been banging my head against the wall for two days trying to get this
thing
> to talk with my 2520 and 2621. It seems that it rejects the spids that I
I use these, and have sold several. My personal isdn sim in my lab is a
merge 2000.
> code into the router based upon the info supplied by Merge. The catch is
on
> a few occasions, I've been able to make a successful call after pulling
the
> Cat5 and quickly reconnecting it (the SPIDS suddenly become valid for no
> apparent reason!). The router config itself stays the same. I've tried
> everything, multilink, no multilink, one SPID vs. two SPIDS.... I've tried
> National ISDN, AT&T, and Nortel DMS-100 config options on the Merge
itself.
> None of them seem to work properly. Perhaps I am missing something in the
> Merge configuration, a little secret of sorts?
>
> Rather than going further into details now, let me know if anyone out
there
> has any experience, and then I'll provide greater config info.
>
> Thanks again! I need to sleep tonight!!!!
> -Mark
mark,
post your config for the isdn endpoints. I will let you know if it should
work with the default merge parameters.
Make sure you are plugged into the right port (S/T or U) based on what
your router has on it.
Brian
-----------------------------------------------
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny, CCIE #8036 Netjam, LLC
signal@netjam.net http://www.netjam.net
VISA/MC/AMEX/COD phone: 318-212-0245
30 day warranty fax: 318-212-0246
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:19 GMT-3