From: Larson, Chris (Contractor) (Chris.Larson@xxxxxx)
Date: Tue Nov 20 2001 - 11:38:39 GMT-3
I think you would have to put the
no ipx rip
statement into your config to keep rip from ebing used on those interfaces
-----Original Message-----
From: Stanford M. Wong [mailto:stanford@cns-hawaii.com]
Sent: Tuesday, November 20, 2001 12:20 AM
To: Daniel Hong; ccielab@groupstudy.com
Subject: RE: IPX NLSP area-address
IPX rip automatically gets redistributed into both NLSP and IPX EIGRP.
stanford
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Daniel Hong
Sent: Monday, November 19, 2001 5:48 PM
To: ccielab@groupstudy.com
Cc: Michael Wong; Voytek Mielczarek
Subject: IPX NLSP area-address
Hi Guys,
I'm puzzled.
area-address seems doesn't work as expected. I have ipx network 1 to 5 and
1000, 2000, 3000 configured on loopback interfaces, I only want put single
digit ipx networks into the nlsp process, so i used
ipx router nlsp area1
area-address 0 fffffff0
no redistribute rip
but from the nlsp neighbour, I have all the routes, include 1000,2000,3000
did i miss something..
Daniel
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:19 GMT-3