From: SWBell (lrlab@xxxxxxxxxx)
Date: Tue Nov 20 2001 - 11:20:16 GMT-3
I think someone else touched on the reverse telnet method. A good example
and description in at the following Site. Also helpfull there are the basic
configs for the CC labs to aid in simulating the one day.
http://www.bradshawlabs.com/home.htm
HTH
Mitch
----- Original Message -----
From: "Menga, Justin" <Justin.Menga@compaq.com>
To: "tom cheung" <tkc9789@hotmail.com>; <ccielab@groupstudy.com>
Sent: Monday, November 19, 2001 6:48 PM
Subject: RE: VOIP testing
> Hi,
>
> The command is undocumented and is indeed 'csim start xxxxx' - I think
> you'll probably need an E or T train to support this command though...
>
> Regards
> Justin Menga CCIE#6640 CCDP CCNP+Voice+ATM MCSE+I CCSE
> Network Solutions Architect
> Wireless & E-Infrastructure
> Compaq Computer New Zealand
> DDI: +64-9-918-9381 Mobile: +64-21-349-599
> mailto: justin.menga@compaq.com
> web: http://www.compaq.co.nz
>
>
>
> -----Original Message-----
> From: tom cheung [mailto:tkc9789@hotmail.com]
> Sent: Tuesday, 20 November 2001 3:09 a.m.
> To: ccielab@groupstudy.com
> Subject: VOIP testing
>
>
> Group,
> I've been looking for ways to test VOIP without having to be physically
> in
> front of my rack and pick up the phone. In searching the archives,
> someone
> had suggested the command "csim start ####". I've tried it on one of my
>
> routers running jo3s56i-mz.121-7, the router does not recognize the
> command.
> Can someone shed some light on how to use this command and what IOS is
>
> required? Thanks.
>
> Tom
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:19 GMT-3