From: John Kupec (jkupec2@xxxxxxxxxx)
Date: Mon Nov 19 2001 - 14:32:32 GMT-3
Dane Clemons wrote:
>
> I'm currently using the below image on a 2500 series router, when I use the
> following command it causes my router to reboot, has anyone experienced the s
ame
> problem?
> c2500-jos56i-l.121-1.T.bin
>
> router ospf 1
> distribute-list 1 in
I am running the c2500-jos56i-l.121-2.T.bin image and it doesn't
seem to have that problem. Doesn't exactly answer your question
but maybe you could try this image instead? It's worked well
for me for the last year or so.
R1#sho ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.1(2)T, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 16-May-00 20:45 by ccai
Image text-base: 0x0307D490, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWARE (fc1)
R1 uptime is 4 weeks, 3 days, 47 minutes
System returned to ROM by power-on
System restarted at 09:32:54 PDT Fri Oct 19 2001
System image file is "flash:/c2500-jos56i-l.121-2.T.bin"
cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of
memory.
Processor board ID 06909061, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
R1#
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:18 GMT-3