From: Neil Garcia Legada (nlegs@xxxxxxxxx)
Date: Mon Nov 19 2001 - 02:51:57 GMT-3
Try this ....
hostname R13
!
interface Serial0/0
ip address 10.1.1.13 255.255.255.0
encapsulation atm-dxi
no keepalive
clockrate 128000
dxi pvc 0 32 snap
dxi map ip 10.1.1.14 0 32 broadcast
!
hostname R14
!
interface Serial0/0
ip address 10.1.1.14 255.255.255.0
encapsulation atm-dxi
no keepalive
dxi pvc 0 32 snap
dxi map ip 10.1.1.13 0 32 broadcast
!
-----Original Message-----
From: Fanglo MA fangloma@pacific.net.hk
Sent: Mon, 19 Nov 2001 12:26:50 +0800 (HKT)
To: Parry.Chua@compaq.com
CC: mamoor@ieee.org, ccielab@groupstudy.com
Subject: RE: can i use other ATM switches other then LS1010
Dear Parry,
Would you mind share how to use serial interface to pratice ATM.
Regards,
Fanglo
On Sun, 18 Nov 2001, Chua, Parry wrote:
> You can do back-to-back w/o a L01010 switch, infact you can also try
> serial interface using
> dxi encapsulation with certain limitation.
>
> Parry
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Sunday, November 18, 2001 7:49 PM
> To: ccielab@groupstudy.com
> Subject: can i use other ATM switches other then LS1010
>
>
> hello guys...
> need ur help!
> I am going to buy two routers with ATM modules to do my ATM labs. The
> questions arised are:
>
> 1- Do i need to buy an LS1010, cant i do this with third company swtich
> like
> bay/nortal.
> 2- What ATM module for the routers should i buy ...i am getting round in
> the
> complex of ST,SC etc.... can someone explain me in detail.
> 3- do i have to do both PVCs and SVCs for the lab prep.
>
> I have seen at ebay that other company ATM switches are cheaper...
> Please explain me in points ... it will be greatly appreaciated
>
> Thanks.
> -Mamoor
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:18 GMT-3