Re: 32bits Mask on Ethernet Int

From: Jean-Francois Vaillancourt (hans@xxxxxxx)
Date: Mon Nov 19 2001 - 00:50:43 GMT-3

• Next message: Fanglo MA: "RE: can i use other ATM switches other then LS1010"
• Previous message: Brian: "Re: 32bits Mask on Ethernet Int"
• Maybe in reply to: Daniel Hong: "32bits Mask on Ethernet Int"
• Next in thread: Brian Dennis: "Re: 32bits Mask on Ethernet Int"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
At 2001-11-19, you wrote:
>It's possible to config an ip address with 32bit mask on an Ethernet
>interface.

The closest you'll get is /31, for point-to-point links. That's with 12.2T,
so not really relevant for the lab:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122
t/122t2/ft31addr.htm

Regards,

Jean-Francois

• Next message: Fanglo MA: "RE: can i use other ATM switches other then LS1010"
• Previous message: Brian: "Re: 32bits Mask on Ethernet Int"
• Maybe in reply to: Daniel Hong: "32bits Mask on Ethernet Int"
• Next in thread: Brian Dennis: "Re: 32bits Mask on Ethernet Int"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:18 GMT-3