From: Fanglo MA (fangloma@xxxxxxxxxxxxxx)
Date: Sun Nov 18 2001 - 13:29:18 GMT-3
Hi,
Still no luck with no frame-relay inverse-arp. show frame-relay pvc still
note me the DCLI is deleted. Have search CCO but can get any useful info
concerning about deleted DCLI and under what situation DCLI will be
deleted. Does it need some script in FR-switch to enable it?
Regards,
Fanglo
On Sun, 18 Nov 2001, Maurizio Roggia wrote:
> no frame-relay inverse-arp
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Fanglo MA
> Sent: 18 November 2001 16:28
> To: Joseph H Marti
> Cc: ccielab@groupstudy.com
> Subject: Re: Can't ping FR own interface
>
>
> Dear Joseph,
>
> To simplify the case, the same actually happen at R4. i.e. R4 cannot ping
> itself serial 0. I add the config with R4 as:
>
> host r4
> !
> int s0
> ip address 192.168.252.4 255.255.255.0
> encap frame
> frame-relay map ip 192.168.252.3 321
> frame-relay map ip 192.168.252.4 123
> frame-relay interface-dlci 123
> no shut
> !
>
> BUT THE SAME CASE HAPPEN! I still be timeout. I'm using 12.1.11 image. Any
> suggestion?
>
> Regards,
> Fanglo
>
> On Sun, 18 Nov 2001, Joseph H Marti wrote:
>
> > There's no layer 3 to layer 2 mapping. Add FR map statement with local IP
> > address and dlci.
> >
> > ----- Original Message -----
> > From: "Fanglo MA" <fangloma@pacific.net.hk>
> > To: <ccielab@groupstudy.com>
> > Sent: Sunday, November 18, 2001 6:39 AM
> > Subject: Can't ping FR own interface
> >
> >
> > > Hi ALL,
> > >
> > > I am reviewing FR and find that I cannot ping the router own FR serial.
> I
> > > can ping from other routers via the FR but I cannot ping itself from the
> > > router. I can ping other own serial interface from the router too.
> Anyone
> > > would have suggestions or reason why I can't ping? Below is my config.
> > >
> > > R3 config
> > > host r3
> > > !
> > > int s0
> > > ip address 192.168.252.3 255.255.255.0
> > > encap frame
> > > frame-relay map ip 192.168.252.4 123
> > > frame-relay map ip 192.168.252.5 124
> > > no shut
> > > !
> > > int s1
> > > ip address 192.168.250.3 255.255.255.0
> > > no shut
> > > !
> > >
> > > R4 config
> > > host r4
> > > !
> > > int s0
> > > ip address 192.168.252.4 255.255.255.0
> > > encap frame
> > > frame-relay map ip 192.168.252.321
> > > no shut
> > > !
> > >
> > > R5 config
> > > host r5
> > > !
> > > int s0
> > > ip address 192.168.252.4 255.255.255.0
> > > encap frame
> > > frame-relay map ip 192.168.252.3 421
> > > no shut
> > > !
> > >
> > > R4, R5 can do ping to R3
> > > R3 can do ping to R4, R5
> > >
> > > R3 can do ping to its s1
> > > BUT R3 TIMEOUT WHEN PING ITS S0.
> > >
> > > Regards,
> > > Fanglo
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:17 GMT-3