From: Andy Cuberly (andyc@xxxxxxxxxx)
Date: Sat Nov 17 2001 - 14:18:47 GMT-3
To only allow SAPS you should use something similar to the following:
dlsw remote-peer 0 tcp x.x.x.x lsap-output-list 200
Access-list 200 permit 0x0000 0x0d0d
the icanreach statement is used to tell the other router what mac addresses
to store to prevent an explorer frame from being sent for that resource.
Andy Cuberly
CCIE #8386
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
tom cheung
Sent: Saturday, November 17, 2001 8:38 AM
To: ccielab@groupstudy.com
Subject: DLSW SNA SAP filtering
If I have r1 and r2 as dlsw peers and I want r1 to tell r2 to only forward
SNA SAPs to r1, should the configuration on r1 be:
1. icanreach 00 04 08 0c or
2. icahreach 00 01 04 05 08 09 0c 0d?
TIA
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:17 GMT-3