From: KK FoK (rgb98a@xxxxxxxxxxx)
Date: Fri Nov 16 2001 - 12:53:28 GMT-3
under TrCRF configuration there is a parameter called "Ring Number".
Does it have anything to do with the ring number defined on the router, like
1 & 3 defined for source-bridge 1 2 3 or the virtual ring number 10 defined
for dlsw like source-bridge ring-group 10 ? Or is it simply a random number
independent of those ring numbers ?
>From: "Andy Cuberly" <andyc@netcat.com>
>Reply-To: "Andy Cuberly" <andyc@netcat.com>
>To: "'Shaun Wakelen'" <Shaun.Wakelen@telindus.co.uk>, "'warren
>perrett'" <warrenperrett@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE: cat 3924
>Date: Thu, 15 Nov 2001 07:20:53 -0800
>
>The things to remember are these:
>
>Create a Virtual Bridge (trbrf)
>Create a virtual Ring (trcrf)
>Assign Physical ports to the rings you created
>Assign IP address and enable IP by selecting Boot P when needed
>
>**VERY IMPORTANT**
>Ring numbers and Bridge numbers are entered into the switch in HEX, so make
>sure you convert the decimal number to HEX before you enter it into the
>switch.
>
>Andy Cuberly
>CCIE #8386
>
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Shaun Wakelen
>Sent: Thursday, November 15, 2001 6:43 AM
>To: warren perrett; ccielab@groupstudy.com
>Subject: RE: cat 3924
>
>
>Try this link
>http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3920/ct3920ug/index.h
>tm
>
>There are several sections there, but the VLAN tutorial is very straight
>forward and helpful.
>
>I have never seen or worked on one of these switches either. On my first
>lab
>attempt I didn't know how to configure the switch correctly, on my 2nd
>attempt I managed to do what was required.
>
>Good luck.
>Shaun
>
>-----Original Message-----
>From: warren perrett [mailto:warrenperrett@hotmail.com]
>Sent: 15 November 2001 13:08
>To: ccielab@groupstudy.com
>Subject: cat 3924
>
>
>any one have any info on how to config the 3924 series switch ? how to
>drive the menu ? I have a lab soon and have never seen one of these
>beasts :( many thanks.
>
>------------------------------------------------------------------------
>
>Get your FREE download of MSN Explorer at http://explorer.msn.com
>.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:17 GMT-3