From: Gabriele Buratti (g.buratti@xxxxxxxxxx)
Date: Fri Nov 16 2001 - 12:37:19 GMT-3
Hi guys,
I'm trying to configure a pix firewall (6.1.1) to accept incoming
ipsec connections from vpn3000 software client. There is also a acs (2.6.2)
server authenticating users. Everything works really fine, except for
static ip assignment to a vpn user: I set the address in user parameters of
acs and the client doesn't look at it.
I found tons of examples on Cisco site regarding my config, but all of them
did use a ip local pool on pix, so address assignment via radius/tacacs.
Any ideas ? May the vpn client address would be assigned via another radius
attribute different from that one ?
Thanks in advance
Gabriele
========================================
Gabriele Buratti
SET Telecomunicazioni S.p.A.
Tel +39.02954491.1
Fax +39.02954491.21
CCNP Certified - Security Specialist
e.mail g.buratti@setspa.com
========================================
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:17 GMT-3