From: Nate VanMaren (Nate.VanMaren@xxxxxxxxxxxxxxxxxxx)
Date: Fri Nov 16 2001 - 01:42:15 GMT-3
So if one had this hardware (say a Local Director 416) how would one obtain a k
ey for the software to load?
Thanks
-Nate Van Maren
-CCIE #7911
>>> "Brad Ellis" <bellis@ccbootcamp.com> 11/12/01 15:10 PM >>>
I dont believe there is a 4MB flash card, just a 2MB and 16MB. fyi
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
bellis@optsys.net
used Cisco gear: www.optsys.net
CCIE Labs, racks, and classes: http://www.ccbootcamp.com/quicklinks.html
----- Original Message -----
From: "Hansang Bae" <hbae@nyc.rr.com>
To: <ccielab@groupstudy.com>
Sent: Monday, November 12, 2001 1:57 PM
Subject: RE: HELP ::) Home made Pix firewall question?
> At 03:13 PM 11/12/2001 +0500, Ahmed Mamoor Amimi wrote:
> >I am also interested and was... when u or someone else have posted at
> >comp.dcom.sys.cisco but didnt followup. can u please tell me again or its
> >just a fake.
>
>
>
>
> Here are the components that make up:
>
> Cisco LocalDirector 430/416
> Cisco Pix Firewall 520
>
> MOTHERBOARD:
> Intel Motherboard SE440BX-2 $ 100
>
> NETWORK INTERFACE:
> Intel Pro100/B 10/100 NIC PRO100/B $ 40
> - OR -
> Osicom 4 Ethernet Port PCI OLN-2404TX $ 900
>
> ISA FLASH CARD:
> 16MB ISA Flash Card (PEP) CISCO - $ 700
> - OR -
> 4MB ISA Flash Card (??) ?? $ --?
>
> hsb
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:16 GMT-3