From: CCIE Cisco (c_ccie@xxxxxxxxxxx)
Date: Thu Nov 15 2001 - 14:42:39 GMT-3
Yes,
I know what exactly are you talking here. I also spent couple of hours
to figure this out from IPEXPERT Lab, their answer is missing something.
The following Link from cisco site will be helpful
http://www.cisco.com/warp/public/105/52.html
Regards,
>From: steven.j.nelson@bt.com
>Reply-To: steven.j.nelson@bt.com
>To: ccielab@groupstudy.com
>Subject: IGRP Connected Networks Redistribution
>Date: Wed, 14 Nov 2001 10:33:33 -0000
>
>Guys,
>
>I must be going mad......I've been at this too long.
>
>I have 2 routers R2 and R4 connected by frame relay, I am running IGRP
>(AS1)
>on both boxes. I am trying to redistribute a connected network (loop 0)
>from
>R4 into IGRP so R2 can see it. I realise of course that R2 will see the
>link
>a classful (i.e 10.0.0.0) but I cant even get that.
>
>I think this maybe some kind of bug or the fact the A already has a
>connected network in the 10.0.0.0 range (Albeit subnetted), configs below.
>
>**** Router 2 ****
>
>interface Loopback0
> ip address 10.2.2.2 255.255.255.0
> no ip directed-broadcast
>!
>interface Ethernet0
>ip address 150.50.17.2 255.255.255.0
> no ip directed-broadcast
>!
>interface Serial0
> no ip address
> no ip directed-broadcast
> encapsulation frame-relay
> cdp enable
>!
>interface Serial0.24 point-to-point
> ip address 150.50.24.2 255.255.255.0
> no ip directed-broadcast
> frame-relay interface-dlci 104
>!
>router igrp 1
> passive-interface Ethernet0
> network 150.50.0.0
>!
>ip classless
>!
>line con 0
> password cisco
> login
> transport input none
>line vty 0 4
> password cisco
> login
>!
>end
>
>**** Router 4 ****
>
>!
>interface Loopback0
> ip address 10.4.4.4 255.255.255.255
> no ip directed-broadcast
>!
>interface Ethernet0/0
> no ip address
> no ip directed-broadcast
> no keepalive
>!
>interface Serial0/0
> ip address 150.50.24.4 255.255.255.0
> no ip directed-broadcast
> encapsulation frame-relay
> ip split-horizon
> no ip mroute-cache
> frame-relay map ip 150.50.24.2 401 broadcast
> no frame-relay inverse-arp
>!
>router igrp 1
> redistribute connected metric 56 1000 255 1 1500
> network 150.50.0.0
>!
>ip classless
>!
>line con 0
> password cisco
> login
> transport input none
>line aux 0
>line vty 0 4
> password cisco
> login
>!
>end
>
>
>Steve Nelson
>Customer Engineer
>BT Ignite- National Solutions
>T: +44 (0)1422 338881 M: +44 (0)7811 944172
>e-mail: steven.j.nelson@bt.com
>pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> > British Telecommunications plc
> > Registered office: 81 Newgate Street London EC1A 7AJ
> > Registered in England no. 1800000.
> > This electronic message contains information from British
>Telecommunications plc which may be privileged or confidential. The
>information is intended to be for the use of the individual(s) or entity
>named above. If you are not the intended recipient be aware that any
>disclosure, copying, distribution or use of the contents of this
>information
>is prohibited. If you have received this electronic message in error,
>please
>notify us by telephone or email (to the numbers or address above)
>immediately.
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:16 GMT-3