From: Mike Schlenger (mschlenger@xxxxxxxxxxxxxxxx)
Date: Wed Nov 14 2001 - 22:19:03 GMT-3
<YES>, they have to be equal. If you can, set it up b/w 2 routers and make
one end a different byte size....take a look at what happens. Can you
say....no connectivity? Make them equal, and make sure you use the proper
byte size based on your port/CIR speeds.
My experience with FRF.12 is mediocre. On lower speed links (~64k), I've run
into issues, even following the theory/examples to a "T".
Mike
Mike Schlenger
CCIE #7079
N2N Solutions
mschlenger@n2nsolutions.com
-----Original Message-----
From: Ron Royston
To: ccielab@groupstudy.com
Sent: 11/14/01 2:19 PM
Subject: Frame LFI
There are 3 options for LFI w/ Frame, Cisco proprietary, FRF.11, and
FRF.12
end-to-end. In each of these cases, does the configured fragment size
have
to match on both ends of the circuit?
<><><><><><><><><><><><><>
Ron Royston
Avnet Enterprise Solutions
http://www.nsd.avnet.com/
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:15 GMT-3