From: Scott Decker (sdecker@xxxxxxxxxxxxx)
Date: Wed Nov 14 2001 - 00:05:42 GMT-3
Just use 198.72.72.10, it's publicly available as a stratum 2 NTP
server. Many of the links on Google are outdated, FYI. :-)
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
F B
Sent: Tuesday, November 13, 2001 8:24 PM
To: ccielab@groupstudy.com
Subject: Re: AW: Clock can't save
That's right. As I only have 2500/4000's I get the
clock from a NTP server in the internet. Search "ntp
servers" on google and you'll find a big list of them.
--- Peter Whittle <peter@whittle-systems.demon.co.uk>
escreveu: > I think that you will find that the
calendar is only
> available on 4500
> and above, it is not present on my 4000M but is on
> my 4500m and 7000.
>
> Peter
>
> In message
>
<2C7AADF28639254C935BB2C202465AA9027C0960@excbebr300.europe.u
> nity>, Spoerr, Mathias
> <Mathias.Spoerr@getronics.com> writes
> >Hello!
> >
> >You can use the command "calendar set"
> >This command works on Cisco 4xxx and 7xxx.
> >
> >Mathias
> >
> >-----Urspr|ngliche Nachricht-----
> >Von: Jay Hennigan [mailto:jay@west.net]
> >Gesendet: Dienstag, 13. November 2001 07:05
> >An: Kevin
> >Cc: ccielab@groupstudy.com
> >Betreff: Re: Clock can't save
> >
> >
> >On Mon, 12 Nov 2001, Kevin wrote:
> >
> >> Hello all, I set clock in enable mode. But When I
> restart router, clock
> >lost.
> >> How to save clock for router. I test it on 25xx
> and 40xx.
> >
> >There is no battery-backed clock in those routers.
> >
> >Date and time-of-day will be lost on reboot. This
> is normal.
> >
>
> --
> Peter Whittle
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:15 GMT-3