From: SWBell (lrlab@xxxxxxxxxx)
Date: Tue Nov 13 2001 - 16:07:40 GMT-3
Theline "dialer remote-name RACK01R5" on r5 should be "dialer remote-name
r6" provided the hose name on router 6 is indeed r6. If this does not fix
it you may want to post the username pass section of both configs also
Mitch
----- Original Message -----
From: "Khalid Nafie" <knafie@ncr.com.kw>
To: "sclaner" <sclaner@hotmail.com>; "tom cheung" <tkc9789@hotmail.com>;
<ccielab@groupstudy.com>
Sent: Tuesday, November 13, 2001 11:31 AM
Subject: RE: dialer profile problem
> can u send the configuration, did u put dialer inband command?
>
> -----Original Message-----
> From: sclaner [mailto:sclaner@hotmail.com]
> Sent: Tuesday, November 13, 2001 7:29 AM
> To: tom cheung; ccielab@groupstudy.com
> Subject: Re: dialer profile problem
>
>
> Have you specified interesting traffic with a dialer-list?
>
> ----- Original Message -----
> From: "tom cheung" <tkc9789@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, November 08, 2001 22:14
> Subject: dialer profile problem
>
>
> > Group,
> > I have this ISDN problem I couldn't figure out. R5 is setup to call R6,
> > things work fine when bri is configured using legacy stuff. But just
> won't
> > work using dialer profile. Authentication went OK, but R5 will
immediately
> > send a disconnect. R5 is running 12.1.11, and R6 running 12.1.5 code.
> Maybe
> > someone can shed some light here?
> > Here's relevant config and debug output:
> >
> > --------- r5 ---------------
> > interface BRI0/0
> > no ip address
> > encapsulation ppp
> > dialer pool-member 1
> > isdn switch-type basic-ni
> > isdn spid1 3333
> > isdn spid2 4444
> > ppp authentication chap
> > ppp multilink
> > !
> > interface Dialer1
> > ip address 140.4.56.1 255.255.255.252
> > encapsulation ppp
> > ip ospf demand-circuit
> > dialer pool 1
> > dialer remote-name RACK01R5
> > dialer idle-timeout 60
> > dialer string 1111
> > dialer load-threshold 123 outbound
> > dialer-group 1
> > no cdp enable
> > ppp authentication chap
> > ppp chap hostname cisco5
> > ppp multilink
> >
> > --------------- r6 -------------------------
> > interface BRI0
> > ip address 140.4.56.2 255.255.255.252
> > encapsulation ppp
> > dialer idle-timeout 60
> > dialer map ip 140.4.56.1 name cisco5 broadcast
> > dialer load-threshold 125 outbound
> > dialer-group 1
> > isdn switch-type basic-ni
> > isdn spid1 1111
> > isdn spid2 2222
> > ppp authentication chap
> > ppp multilink
> >
> > ---------------- Debug from r5 ---------------
> > 00:12:58: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
> > 00:12:58: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di1
> > 00:12:58: BR0/0:1 PPP: Treating connection as a callout
> > 00:12:58: BR0/0:1 PPP: Phase is ESTABLISHING, Active Open
> > 00:12:58: BR0/0:1 CHAP: Using alternate hostname cisco5
> > 00:12:58: BR0/0:1 LCP: O CONFREQ [Closed] id 9 len 28
> > 00:12:58: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305)
> > 00:12:58: BR0/0:1 LCP: MagicNumber 0xD0646B7A (0x0506D0646B7A)
> > 00:12:58: BR0/0:1 LCP: MRRU 1524 (0x110405F4)
> > 00:12:58: BR0/0:1 LCP: EndpointDisc 1 Local (0x130901636973636F35)
> > 00:12:58: BR0/0:1 LCP: I CONFREQ [REQsent] id 62 len 30
> > 00:12:58: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305)
> > 00:12:58: BR0/0:1 LCP: MagicNumber 0x0818E4FB (0x05060818E4FB)
> > 00:12:58: BR0/0:1 LCP: MRRU 1524 (0x110405F4)
> > 00:12:58: BR0/0:1 LCP: EndpointDisc 1 Local
(0x130B015241434B30315236)
> > 00:12:58: BR0/0:1 LCP: O CONFACK [REQsent] id 62 len 30
> > 00:12:58: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305)
> > 00:12:58: BR0/0:1 LCP: MagicNumber 0x0818E4FB (0x05060818E4FB)
> > 00:12:58: BR0/0:1 LCP: MRRU 1524 (0x110405F4)
> > 00:12:58: BR0/0:1 LCP: EndpointDisc 1 Local
(0x130B015241434B30315236)
> > 00:12:58: BR0/0:1 LCP: I CONFACK [ACKsent] id 9 len 28
> > 00:12:58: BR0/0:1 LCP: AuthProto CHAP (0x0305C22305)
> > 00:12:58: BR0/0:1 LCP: MagicNumber 0xD0646B7A (0x0506D0646B7A)
> > 00:12:58: BR0/0:1 LCP: MRRU 1524 (0x110405F4)
> > 00:12:58: BR0/0:1 LCP: EndpointDisc 1 Local (0x130901636973636F35)
> > 00:12:58: BR0/0:1 LCP: State is Open
> > 00:12:58: BR0/0:1 PPP: Phase is AUTHENTICATING, by both
> > 00:12:58: BR0/0:1 CHAP: Using alternate hostname cisco5
> > 00:12:58: BR0/0:1 CHAP: O CHALLENGE id 5 len 27 from "cisco5"
> > 00:12:58: BR0/0:1 CHAP: I CHALLENGE id 43 len 29 from "RACK01R6"
> > 00:12:58: BR0/0:1 CHAP: Using alternate hostname cisco5
> > 00:12:58: BR0/0:1 CHAP: O RESPONSE id 43 len 27 from "cisco5"
> > 00:12:58: BR0/0:1 CHAP: I SUCCESS id 43 len 4
> > 00:12:58: BR0/0:1 CHAP: I RESPONSE id 5 len 29 from "RACK01R6"
> > 00:12:58: BR0/0:1 CHAP: O SUCCESS id 5 len 4
> > 00:12:58: BR0/0:1 PPP: Treating connection as a callout
> > 00:12:58: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di1
> > 00:12:58: BR0/0:1 PPP: Phase is VIRTUALIZED
> > 00:12:58: Vi1 PPP: Phase is DOWN, Setup
> > 00:12:58: BR0/0:1 PPP: Phase is TERMINATING
> > 00:12:58: BR0/0:1 LCP: O TERMREQ [Open] id 10 len 4
> > 00:12:58: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
> > 00:12:58: BR0/0:1 LCP: State is Closed
> >
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:14 GMT-3