From: Khalid Nafie (knafie@xxxxxxxxxx)
Date: Mon Nov 12 2001 - 16:35:36 GMT-3
   
BUT ON THE SAME CARD ALL THE PORTS ARE WORKING FINE EXCEPT THESE TWO PORTS.
-----Original Message-----
From: Brian [mailto:signal@shreve.net]
Sent: Monday, November 12, 2001 10:57 AM
To: Khalid Nafie
Cc: Ccielab (E-mail)
Subject: Re: OT:Access Server-Wear situation
The card may not be seating properly.  Try to seat it several times.
Brian
On Mon, 12 Nov 2001, Khalid Nafie wrote:
> Guys sorry for the offline topics,
>       We are deploying 3640 with 3 (16 S/A modules) as an AS, the
> configuration is working fine and every thing is working except one port
> show as bad modem, after changing the S/A card i found that there is also
> two ports that don't work!! but under show modem its giving normal status,
> when i tried this module on different router it worked fine.
>       So is there any maximum no. Limitation for the S/A ports? or is
> there any idea i should test it?
>
> the version is c3640-js-mz.121-3a.XI2
> below is the configuration:
>
>
> username RemoteBr password 0 <removed>
> username NBK1-DBackup password 0 <removed>
> username R1SHAMYA password 0 <removed>
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> !
> modemcap entry modem1:FD=&F:AA=S0=1:CD=&C1:DTR=&D1:NEC=E1:NRS=Q0
> call rsvp-sync
> cns event-service server
> !
> !
> !
> !
> !
> !
> source-bridge ring-group 3000
> dlsw local-peer peer-id 10.250.1.1 promiscuous
> dlsw icanreach mac-address 4000.0000.4441 mask ffff.ffff.ffff
> !
> !
> !
> interface Loopback0
>  ip address 10.250.1.1 255.255.255.224
> !
> interface Loopback1
>  ip address 10.250.1.100 255.255.255.224
> !
> interface Loopback2
>  ip address 10.250.1.200 255.255.255.224
> !
> interface Ethernet0/0
>  ip address 10.10.202.10 255.255.255.0
> !
> interface Serial0/0
>  ip address 10.170.1.1 255.255.255.0
>  clockrate 256000
> !
> interface BRI0/0
>  no ip address
>  shutdown
> !
> interface TokenRing0/0
>  ip address 128.128.240.33 255.255.255.0
>  ring-speed 16
>  multiring all
>  source-bridge 100 11 3000
>  source-bridge spanning
> !
> interface Group-Async0
>  ip unnumbered Loopback0
>  encapsulation ppp
>  dialer in-band
>  dialer idle-timeout 200
>  dialer-group 1
>  async default routing
>  async mode dedicated
>  no peer default ip address
>  no fair-queue
>  ppp authentication chap
>  group-range 33 48
> !
> interface Group-Async1
>  ip unnumbered Loopback1
>  encapsulation ppp
>  dialer in-band
>  dialer idle-timeout 200
>  dialer-group 1
>  async default routing
>  async mode dedicated
>  no peer default ip address
>  no fair-queue
>  ppp authentication chap
>  group-range 65 80
> !
> interface Group-Async2
>  ip unnumbered Loopback2
>  encapsulation ppp
>  dialer in-band
>  dialer idle-timeout 200
>  dialer-group 1
>  async default routing
>  async mode dedicated
>  no peer default ip address
>  no fair-queue
>  ppp authentication chap
>  group-range 97 112
> !
> router eigrp 200
>  network 10.0.0.0
>  network 128.128.0.0
>  no auto-summary
>  no eigrp log-neighbor-changes
> !
> ip classless
> no ip http server
> !
> dialer-list 1 protocol ip permit
> !
> !
> dial-peer cor custom
> !
> !
> !
> !
> line con 0
>  transport input none
> line 33 48
>  no exec
>  modem Dialin
>  modem autoconfigure type modem1
>  transport input all
> line 65 80
>  no exec
>  modem Dialin
>  modem autoconfigure type modem1
>  transport input all
> line 97 112
>  no exec
>  modem Dialin
>  modem autoconfigure type modem1
>  transport input all
> line aux 0
>  no exec
>  transport input all
> line vty 0 4
>  password <removed>
>  login
> !
> end
>
> ================================================
> Yours,
> Khaled Nafie
> Network Engineer
> Customer Services
> MCSE,CCDP,CCNP VOICE ACCESS
> NCR Corporation, Kuwait
> Mob.: +965-9872046
> Tel : +965- 2412201, 2412203
> Fax : +965-2413075
-----------------------------------------------
    I'm buying / selling used CISCO gear!!
            email me for a quote
Brian Feeny, CCIE #8036   Netjam, LLC
signal@netjam.net         http://www.netjam.net
VISA/MC/AMEX/COD          phone: 318-212-0245
30 day warranty           fax:   318-212-0246
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:13 GMT-3