From: Rob Hopkins (rshopkins@xxxxxxxxxxxxx)
Date: Sat Nov 10 2001 - 07:11:41 GMT-3
access lists are good, but you could also use interface description fields
as well as snmp
chassis-id , location, contact etc..
Thanks,
Rob Hopkins
CCIE #7428, MCSE, MCNE
----- Original Message -----
From: "Rodgers Moore" <rodgers@the-moores.org>
To: "McCallum, Robert" <Robert.McCallum@let-it-be-thus.com>
Cc: "Cisco@Groupstudy. Com (E-mail)" <cisco@groupstudy.com>; "'Ccielab'
(E-mail)" <ccielab@groupstudy.com>
Sent: Friday, November 09, 2001 10:05 AM
Subject: Re: Comments in Running Config
> Robert,
>
> A config TFTP'd into a router's flash will retain it's comments. I use
named access lists to document info all the time. For example:
>
> ip access-list serialnumber
> remark 44408389291
>
> Rodgers Moore, CCIE# 8153
>
> "McCallum, Robert" wrote:
>
> > Hi,
> >
> > Simple question but I can't find the answer. How do you add comments
into your config. I have tried putting the command in then putting comments
in after it with the ! statement but it doesn't work. I am sure you can do
this but for the life of me can't find out how. I am sure I must have done
> > this on the ICRC course or something that easy. And here I am
attempting the lab when I can't even do this.
> >
> > As in homer speak Doh!
> >
> > Robert McCallum
> > only 6 days left
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:11 GMT-3