From: SFeldberg@xxxxxxxxxxxxx
Date: Fri Nov 09 2001 - 15:55:05 GMT-3
As advertised- after "passive-interface e0" is entered on R2 and R4, the
broadcast updates cease.
Xyplex -012- LAB:2 session 1 resumed
1d21h: RIP: received v1 update from 40.1.1.4 on Ethernet0
1d21h: 44.0.0.0 in 1 hops
r2#
r2#
1d21h: RIP: sending v1 update to 255.255.255.255 via Loopback0 (42.1.1.2)
1d21h: network 40.0.0.0, metric 1
1d21h: network 44.0.0.0, metric 2
1d21h: RIP: sending v1 update to 40.1.1.4 via Ethernet0 (40.1.1.2)
1d21h: subnet 40.1.1.0, metric 1
1d21h: network 42.0.0.0, metric 1
r2#
1d21h: RIP: received v1 update from 40.1.1.4 on Ethernet0
1d21h: 44.0.0.0 in 1 hops
r2#
1d21h: RIP: sending v1 update to 255.255.255.255 via Loopback0 (42.1.1.2)
1d21h: network 40.0.0.0, metric 1
1d21h: network 44.0.0.0, metric 2
1d21h: RIP: sending v1 update to 40.1.1.4 via Ethernet0 (40.1.1.2)
1d21h: subnet 40.1.1.0, metric 1
1d21h: network 42.0.0.0, metric 1
r2#
1d21h: RIP: received v1 update from 40.1.1.4 on Ethernet0
1d21h: 44.0.0.0 in 1 hops
r2#
1d21h: RIP: sending v1 update to 255.255.255.255 via Loopback0 (42.1.1.2)
1d21h: network 40.0.0.0, metric 1
1d21h: network 44.0.0.0, metric 2
1d21h: RIP: sending v1 update to 40.1.1.4 via Ethernet0 (40.1.1.2)
1d21h: subnet 40.1.1.0, metric 1
1d21h: network 42.0.0.0, metric 1
r2#
1d21h: RIP: received v1 update from 40.1.1.4 on Ethernet0
1d21h: 44.0.0.0 in 1 hops
r2#
1d21h: RIP: sending v1 update to 255.255.255.255 via Loopback0 (42.1.1.2)
1d21h: network 40.0.0.0, metric 1
1d21h: network 44.0.0.0, metric 2
1d21h: RIP: sending v1 update to 40.1.1.4 via Ethernet0 (40.1.1.2)
1d21h: subnet 40.1.1.0, metric 1
1d21h: network 42.0.0.0, metric 1
r2#
Stephen Feldberg
e ^ deltacom
phone: 678.835.5437
sfeldberg@edeltacom.com
"Richard
Foltz" To: "RB" <slowgo@home.com>, "cciel
ab"
<ccie2b@rfolt <ccielab@groupstudy.com>
z.com> cc:
Sent by: Subject: Re: Rip Neigbor statment
nobody@groups
tudy.com
11/09/2001
01:36 PM
Please
respond to
"Richard
Foltz"
it wont if you have made the interface passive. If its not passive, then it
will still send the broadcasts.
Richard Foltz, CCIE#8339, CCNP-Voice, CCDP, MCSE+I, Network+, A+
----- Original Message -----
From: "RB" <slowgo@home.com>
To: "ccielab" <ccielab@groupstudy.com>
Sent: Friday, November 09, 2001 12:27 PM
Subject: Rip Neigbor statment
> I know that the neigbor statement in rip sends out unicast updates to
that
> neighbor, but does it also send no other updates? Let's say you had
several
> routers on an ethernet segment with RIP running, and you used a neigbor
> statement from a-b, does c no longer receive rip updates from a?
> Thanks,
>
> RBI
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:11 GMT-3