From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Fri Nov 09 2001 - 15:12:58 GMT-3
Thanks everyone for your comments unfortunately however none of them fix the pr
oblem.
Frank I took of the frame llc2 statements with no joy.
Chris Larson I took of the border statements with no joy.
Eddie I already had those map statements in.
Tom whether it is from or to token ring doesn't matter. The problem is the pee
rs won't come up.
Chris Stephenson I tried to use it on point-to-point links but still with no jo
y.
As I said at the start of the message thanks for your feedback. Unless there i
s someone out there who has done this and knows the answer to this I hope to he
ll that this isn't in the lab exam.
Just in case there are any proctors reading this my name isn't really Robert M
cCallum
(just in case they say "hee hee hee lets give him the lab with the pass-thru op
tion in it" )
Any other takers
-----Original Message-----
From: fwells12 [mailto:fwells12@hotmail.com]
Sent: 09 November 2001 16:39
To: McCallum, Robert; 'Ccielab' (E-mail); Cisco@Groupstudy. Com (E-mail)
Subject: Re: dlsw pass-thru
When utilizing the passthru option over frame-relay you should map to 'dlsw'
and not 'llc2'. Try changing your frame maps to the following:
frame-relay map dlsw 503 broadcast
You will need to change all of your existing llc2 maps...
----- Original Message -----
From: "McCallum, Robert" <Robert.McCallum@let-it-be-thus.com>
To: "'Ccielab' (E-mail)" <ccielab@groupstudy.com>; "Cisco@Groupstudy. Com
(E-mail)" <cisco@groupstudy.com>
Sent: Friday, November 09, 2001 8:02 AM
Subject: dlsw pass-thru
> Hi folks me again.
>
> I am having a problem getting dlsw lite with pass-thru to form peers
between two routers. Basically they never form peers. The configs of both
routers are posted below as well as the debug outputs from both. Any help
would be great here as I have never been able to get this to work and am
unsure
> as to why.
>
> ROUTER 5
>
> source-bridge ring-group 500
> dlsw local-peer peer-id 137.1.5.5 group 235 border
> dlsw remote-peer 0 frame-relay interface Serial0/0.1 503 pass-thru
> dlsw remote-peer 0 frame-relay interface Serial0/0.1 502 pass-thru
>
> interface Serial0/0.1 multipoint
> ip address 137.1.2.131 255.255.255.128
> ip ospf message-digest-key 1 md5 robert
> ip ospf network point-to-multipoint
> frame-relay map dlsw 503 broadcast
> frame-relay map dlsw 502 broadcast
> frame-relay map llc2 503 broadcast
> frame-relay map llc2 502 broadcast
> frame-relay map ip 137.1.2.129 502 broadcast
> frame-relay map ip 137.1.2.130 503 broadcast
> frame-relay map ip 137.1.2.131 503
> frame-relay interface-dlci 502
> frame-relay interface-dlci 503
>
> ROUTER 3
>
> dlsw local-peer peer-id 137.1.3.3 group 235 promiscuous
> dlsw remote-peer 0 frame-relay interface Serial0/0 305 pass-thru
> dlsw bridge-group 1
> !
> interface Serial0/0
> mac-address 0000.0000.1133
> ip address 137.1.2.130 255.255.255.128
> encapsulation frame-relay
> ip ospf message-digest-key 1 md5 robert
> ip ospf network point-to-multipoint
> ip policy route-map pingr6
> no fair-queue
> clockrate 128000
> frame-relay map dlsw 305 broadcast
> frame-relay map llc2 305 broadcast
> frame-relay map ip 137.1.2.129 305 broadcast
> frame-relay map ip 137.1.2.130 305
> frame-relay map ip 137.1.2.131 305 broadcast
> frame-relay interface-dlci 305
> no frame-relay inverse-arp
>
> ROUTER 5 OUTPUT FROM DEBUG DLSW
>
> 06:24:24: DLSw: START-FSTPFSM (peer on interface Serial0/0):
event:ADMIN-OPEN CONNECTION state:
> DISCONN
> 06:24:24: DLSw: dfstp_action_a() attempting to connect peer on interface
Serial0/0
> 06:24:24: DLSw: Connection opened for peer on interface Serial0/0
> 06:24:24: DLSw Direct: vencap failed - dropping packet for peer on
interface Serial0/0
> 06:24:24: DLSw: Capabilities send failed to peer on interface Serial0/0
> 06:24:24: DLSw: END-FSTPFSM (peer on interface Serial0/0):
state:DISCONN->WAIT_CAP
>
>
> ROUTER 3 OUTPUT FROM DEBUG DLSW
>
> 06:22:49: DLSw: START-FSTPFSM (peer on interface Serial0/0):
event:TIMER-TIMER EXPIRED state:WA
> IT_CAP
> 06:22:49: DLSw: dfstp_action_d() close connection for peer on interface
Serial0/0
> 06:22:49: DLSw: DIRECT aborting connection for peer on interface Serial0/0
> 06:22:49: DLSw: END-FSTPFSM (peer on interface Serial0/0):
state:WAIT_CAP->DISCONN
>
> Cheers for any help
>
>
>
>
> Robert McCallum
> Ext 730 3448
> DDI : 01415663448
> Mobile : 07818002241
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:11 GMT-3