PIM-SM traffic flow

From: Shane Miles (smiles@xxxxxxxxxx)
Date: Fri Nov 09 2001 - 01:08:27 GMT-3

• Next message: yanglei: "About C4003"
• Previous message: tom cheung: "dialer profile problem"
• Next in thread: tom cheung: "Re: PIM-SM traffic flow"
• Maybe reply: tom cheung: "Re: PIM-SM traffic flow"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
        Lets says we have this weird situation below. All interfaces are
configured for PIM-SM and R3 is the RP. When the PC joins the multicast
group does all traffic still go from the source to the RP(R3) then back to
R2 and out to the PC or can R2 short-cut it? Thanks.

Source---<R1>-----<R2>-----<R3>(RP)
                          |
                       PC

--
Shane P. Miles

• Next message: yanglei: "About C4003"
• Previous message: tom cheung: "dialer profile problem"
• Next in thread: tom cheung: "Re: PIM-SM traffic flow"
• Maybe reply: tom cheung: "Re: PIM-SM traffic flow"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:10 GMT-3