RE: rip problem

From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Thu Nov 08 2001 - 04:31:32 GMT-3


   
When you change subnet mask to /16, 192.168.x.x is in one subnet. After all,
I don't think rip support super subneting..

> Parry Chua
>

-----Original Message-----
From: dhuskey [mailto:dhuskey@xnet.com]
Sent: Thursday, November 08, 2001 3:15 PM
To: ccielab@groupstudy.com
Subject: rip problem

i thought i was going to do an easy excercise and
knock out RIP v1,v2.

it worked perfectly when i used these addresses.

192.168.1.1/24 --rtr1 <-> rtr2-- 192.168.1.2/24
router rip
network 192.168.1.0

but when i change the subnet mask to /16
they don't exchange routes.
debug ip rip -- shows no packets going out of or into either router.
sho ip proto -- shows the correct network and interfaces as active.

i left all other commands to the default for 12.0 ios.
        ip classless
        ip rip send v1 receive v1 v2
        ip subnet-zero
etc.

Anybody have any ideas what is going on.
thanks,
David



This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:08 GMT-3