From: Brian Dennis (brian@xxxxxx)
Date: Tue Nov 06 2001 - 15:47:18 GMT-3
Yes but you will need to add what part of the configuration you want them to
see. Below is an example:
privilege interface level 5 ip address
privilege interface level 5 ip
privilege configure level 5 interface
privilege exec level 5 show running-config
privilege exec level 5 show
Access-Server-B#en 5
Access-Server-B#sho run
Building configuration...
Current configuration:
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
!
interface Ethernet0
ip address 172.16.1.51 255.255.255.0
!
interface Serial0
no ip address
!
interface Serial1
no ip address
!
!
end
Access-Server-B#
Brian Dennis, CCIE #2210 (R&S)(ISP/Dial) CCSI #98640
5G Networks, Inc.
brian@5g.net
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Spoerr, Mathias
> Sent: Tuesday, November 06, 2001 8:12 AM
> To: ccielab@groupstudy.com
> Subject: Privileged exec level
>
>
> Hello!
>
> Is it possible to configure a privileged exec level 10 to view the
> running-config, or is it only possible with privileged exec level 15?
>
> Thank's
> Mathias
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:05 GMT-3