From: Peter Whittle (peter@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
Date: Tue Nov 06 2001 - 13:16:32 GMT-3
2901 & 2926T run cat 5k version of CATOS. Exactly the same binary image.
2948G runs cat 4k version of CATOS, the commands are basically the same
as cat 5k but it does not support ISL trunking only 802.1q trunking.
(You can perform the same functions in a lab environment as with ISL and
it has the advantage that you can run 'dot1q' on some of the 10 BaseT
ethernet interfaces, in particular it will run on IOS 12.2.3 enterprise
load on 4500M with NP-2E. This is somewhat less expensive than the NM or
NP -1FE 100 BaseT interfaces.)
Peter
In message <CLEELDFMKPJHAFEBNEKAMEEHCLAA.chadd_workman@lucent.com>,
Chadd Workman <chadd_workman@lucent.com> writes
>The 2948G runs an IOS similar to the 5000 IOS.
>
>Chadd Workman
>Network Systems Engineer
>CCNP/DP CCSE CNE
>Lucent Worldwide Services, Houston
>Chadd_Workman@lucent.com
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>KK FoK
>Sent: Monday, November 05, 2001 7:15 PM
>To: ccielab@groupstudy.com
>Subject: 29xx/35xx switches with Cat 5000 ios ???
>
>
>I saw there were some items for sales and the advertisement said 29xx loaded
>with Cat 5000 IOS.
>
>Does anyone know if this is possible and the switch models that can be
>loaded with Cat 5000 IOS ?
>
>I'm tinking of getting a low cost subsitute for an expensive cat 5000.
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:05 GMT-3