From: Spoerr, Mathias (Mathias.Spoerr@xxxxxxxxxxxxx)
Date: Mon Nov 05 2001 - 13:50:34 GMT-3
What do you take as ISDN Simulator?
Thank's
Mathias
-----Urspr|ngliche Nachricht-----
Von: Brad Ellis [mailto:bellis@ccbootcamp.com]
Gesendet: Freitag, 02. November 2001 18:53
An: steven.j.nelson@bt.com; jim.phillipo@guardent.com;
ccielab@groupstudy.com
Betreff: Re: Looking for advice on home lab
Here's what I consider a great lab (with exception to the accessories,
voice, and ATM):
-------------------------------------------------------
2x 2501s
2x 2503s (for ISDN)
1x 2511 (reverse telnet AS)
3x 2513s (TR/Ether)
1x 2522 (frame-switch)
ISDN Simulator
Catalyst 5k switch
3900 TR Switch
-------------------------------------------------------
thanks,
-Brad Ellis
CCIE#5796
Network Learning Inc
bellis@ccbootcamp.com
used Cisco gear: www.optsys.net
CCIE Labs, racks, and classes: www.ccbootcamp.com
----- Original Message -----
From: <steven.j.nelson@bt.com>
To: <jim.phillipo@guardent.com>; <ccielab@groupstudy.com>
Sent: Friday, November 02, 2001 12:12 PM
Subject: RE: Looking for advice on home lab
> Make up your own labs with what you have, I know someone who passed R&S
> recentley with only 3 2500's !!
>
> I know what you mean, I have nearly every piece of kit going, 11 routers,
2
> switches, TR switch, ISDN ADSL Emulator.... And I still think I don't have
> all the gear...
>
> Just make do and learn the technologies, that's the message..
>
> Steve
>
> -----Original Message-----
> From: jim.phillipo@guardent.com [mailto:jim.phillipo@guardent.com]
> Sent: 02 November 2001 16:48
> To: ccielab@groupstudy.com
> Subject: Looking for advice on home lab
>
>
> I presently have
>
> 2-2611
> 2514
> 2-2501
> 2-2502
> 1-2503
> 2-2523
> cat 5k
>
> No matter which lab prep guide I look at I am always missing one piece of
> the puzzle. Is it general practice to go out and buy whatever it takes to
do
> the labs or cut pieces out of them and make due ?
>
> Just Wondering
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:04 GMT-3