From: Greg Yelas (gyelas@xxxxxxxxx)
Date: Sun Nov 04 2001 - 22:24:13 GMT-3
You have to type subnets at the end of the redistribution line. let me know
if this works..
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Kevin
Sent: Monday, 5 November 2001 12:10 PM
To: ccielab@groupstudy.com
Subject: Ospf doesn't allow to redistribute connect interface!
Hello all, I do a lab that ospf run wan interface.
I want to redistribute lan interface into ospf, it failed.
When I add a loopback interface. Everything is OK!
I can see lsa type-5 in ospf database. But only 10.1.1.1 can
bee seen. Cisco ios verion is 12.07T
Router configuration:
interface s0
ip add 202.106.100.1 255.255.255.0
interface e0
ip add 192.168.1.1 255.255.255.192
int loopback 0
ip add 10.1.1.1 255.255.255.224
router os 1
net 202.106.100.1 0.0.0.0 a 0
redistribute connect
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:03 GMT-3