From: Michael Wong (Michael.Wong@xxxxxxxxxx)
Date: Sat Nov 03 2001 - 21:49:46 GMT-3
Looking at your configs, I'm assuming you want the network 172.44.50.x/24 to ap
pear in your OSPF database, however the network is a "connected" interface on t
he router doing the redistribution. Look at your routing table and confirm is t
here is a "C" next to 172.44.50.x/24.
If it is connected, you'll have to do a "redistributed connected" to get the 17
2.44.50.x/24 network into OSPF. It has nothing to do with redistributing IS-IS.
HTH ..... MW :)
-----Original Message-----
From: Al.Gratz@usarc-emh2.army.mil [mailto:Al.Gratz@usarc-emh2.army.mil]
Sent: Friday, 2 November 2001 6:57 am
To: ccielab@groupstudy.com
Subject: RE: ISIS to OSPF redistribution
Sorry!. Isis is only enabled on s1 not s0 and all routers are level-2.
> ----------
> From: McCallum, Robert[SMTP:Robert.McCallum@let-it-be-thus.com]
> Sent: Thursday, November 01, 2001 11:13 AM
> To: 'Al.Gratz@usarc-emh2.army.mil'; ccielab@groupstudy.com
> Subject: RE: ISIS to OSPF redistribution
>
> please see inline but doesn't the question state the isis is enabled on
> s0?
>
> -----Original Message-----
> From: Al.Gratz@usarc-emh2.army.mil [mailto:Al.Gratz@usarc-emh2.army.mil]
> Sent: 01 November 2001 17:40
> To: ccielab@groupstudy.com
> Subject: RE: ISIS to OSPF redistribution
>
>
> The serial 0 interface doesn't need ip router isis, ospf only.
> > ----------
> > From: McCallum, Robert[SMTP:Robert.McCallum@let-it-be-thus.com]
> > Reply To: McCallum, Robert
> > Sent: Thursday, November 01, 2001 5:35 AM
> > To: 'Bauer, Rick'; ccielab@groupstudy.com
> > Subject: RE: ISIS to OSPF redistribution
> >
> > you do not have ip router isis on your serial interface.
> >
> > -----Original Message-----
> > From: Bauer, Rick [mailto:BAUERR@toysrus.com]
> > Sent: 01 November 2001 12:07
> > To: ccielab@groupstudy.com
> > Subject: RE: ISIS to OSPF redistribution
> >
> >
> > Did you turn on clns routing?
> >
> > -----Original Message-----
> > From: Al.Gratz@usarc-emh2.army.mil [mailto:Al.Gratz@usarc-emh2.army.mil]
> > Sent: Wednesday, October 31, 2001 6:00 PM
> > To: ccielab@groupstudy.com
> > Subject: ISIS to OSPF redistribution
> >
> >
> > Hi,
> > my problem is on a router doing ISIS to OSPF redistribution.
> > The interface s1 has isis enabled but is no redistributed into ospf at
> all
> > (it is not in the ospf database type 5 LSA either!).
> >
> > Router R3 config:
> >
> > interface Serial0
> > ip address 172.44.10.3 255.255.255.0
> >
> > interface Serial1
> > ip address 172.44.50.3 255.255.255.0
> > ip router isis
is-type lvel-2
> > clockrate 64000
> >
> > router ospf 44
> > redistribute isis level-2 subnets
> > network 172.44.10.0 0.0.0.255 area 0
> > !
> > router isis
> > net 49.0004.3333.3333.3333.00
> >
> > Any ideas why ?.
> >
> Thank
> > you!
> > Al Gratz
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:03 GMT-3