From: SFeldberg@xxxxxxxxxxxxx
Date: Fri Nov 02 2001 - 14:20:29 GMT-3
Some tips for you and anyone else who is on a limited budget:
1). Use AUX to CON connections with rollover cables instead of terminal
server (see configs below)
2). Use back to back 2501 routers to make a 4-port frame-switch
configuration. (see configs below)
Caveat: Enterprise feature set is required to route FR over tunnel
interfaces
3). Rent rack time from www.bradshawlabs.com for ATM / VoIP / Cat3920
practice
Jeff K is a member of this list and has been quite helpful to the
CCIE-wannabe community
Please feel free to email me with questions about these configs:
Router 2 (1st "half" of frame switch)
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname R2
!
!
ip subnet-zero
ip tcp synwait-time 5
no ip domain-lookup
ip host R3 2001 2.2.2.2
frame-relay switching
!
!
interface Loopback99
ip address 2.2.2.2 255.255.255.255
!
interface Tunnel0
no ip address
tunnel source Ethernet0
tunnel destination 192.19.15.4
!
interface Ethernet0
ip address 192.19.15.2 255.255.255.0
no ip directed-broadcast
no shut
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
no fair-queue
clockrate 1000000
frame-relay lmi-type cisco
frame-relay intf-type dce
fr route 113 int s1 311
fr route 115 int t0 105
fr route 116 int t0 106
no shut
!
interface Serial1
no ip directed-broadcast
encapsulation frame-relay
clockrate 4000000
frame-relay lmi-type cisco
frame-relay intf-type dce
fr route 311 int s0 113
fr route 315 int t0 205
fr route 316 int t0 206
no shut
!
ip classless
!
alias exec cl clear line 1
!
line con 0
privilege level 15
logging synchronous
transport input none
escape-character 2
line aux 0
session-timeout 15
no exec
transport input all
line vty 0 4
privilege level 15
no login
escape-character 2
!
end
Router 4 (2nd "half" of frame switch)
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname R4
!
boot system flash
!
ip subnet-zero
no ip domain-lookup
ip host R5 2001 4.4.4.4
frame-relay switching
!
!
interface Loopback99
ip address 4.4.4.4 255.255.255.255
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
!
interface Tunnel0
no ip address
tunnel source Ethernet0
tunnel destination 192.19.15.2
!
interface Ethernet0
ip address 192.19.15.4 255.255.255.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
no shut
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip route-cache
no ip mroute-cache
no fair-queue
clockrate 4000000
frame-relay lmi-type cisco
frame-relay intf-type dce
fr route 511 int t0 105
fr route 513 int t0 203
fr route 516 int s1 615
no shut
!
interface Serial1
no ip address
encap frame
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
clockrate 4000000
frame-relay lmi-type cisco
frame-relay intf-type dce
fr route 611 int t0 106
fr route 613 int t0 206
fr route 615 int s0 516
no shut
!
no ip classless
!
alias exec cl clear line 1
!
line con 0
privilege level 15
logging synchronous
transport input none
escape-character 4
line aux 0
session-timeout 15
no exec
transport input all
escape-character 4
line vty 0 4
privilege level 15
no login
escape-character 4
!
end
R4#
Stephen Feldberg
e ^ deltacom
phone: 678.835.5437
sfeldberg@edeltacom.com
jim.phillipo@gu
ardent.com To: ccielab@groupstudy.com
Sent by: cc:
nobody@groupstu Subject: Looking for advice on h
ome lab
dy.com
11/02/2001
11:48 AM
Please respond
to jim.phillipo
I presently have
2-2611
2514
2-2501
2-2502
1-2503
2-2523
cat 5k
No matter which lab prep guide I look at I am always missing one piece of
the puzzle. Is it general practice to go out and buy whatever it takes to
do
the labs or cut pieces out of them and make due ?
Just Wondering
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:02 GMT-3