From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Fri Nov 02 2001 - 16:29:15 GMT-3
The DLSW design guide states that you can use the Port-List for ethernet
interfaces, it does not state if it can be used exclusively.
----- Original Message -----
From: "Jon Tucker" <Jon_Tucker@Jabil.com>
To: "'fwells12'" <fwells12@hotmail.com>; <ccielab@groupstudy.com>
Sent: Friday, November 02, 2001 6:00 AM
Subject: RE: More DLSW questions
> I do not believe that you can use a Port list command with an ethernet
> interface, you need to use the bgroup-list command.
>
> -----Original Message-----
> From: fwells12 [mailto:fwells12@hotmail.com]
> Sent: Friday, November 02, 2001 3:10 AM
> To: ccielab@groupstudy.com
> Subject: More DLSW questions
>
>
> In the 'dlsw remote-peer 4 tcp n.n.n.n' command, 4 is a Port-List with an
> ethernet interface defined in it (see below). Using the port-list in
this
> fashion, does it negate having to use the bgroups routine to allow remote
> traffic to get to an ethernet LAN on the local router, or must we use
both?
>
> dlsw port-list 4 Ethernet0
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:02 GMT-3