From: Ouellette, Tim (tim.ouellette@xxxxxxx)
Date: Fri Nov 02 2001 - 08:03:14 GMT-3
Have you tried "term mon" ??
Tim
> -----Original Message-----
> From: Stephen Oliver [SMTP:stevie_oliver@hotmail.com]
> Sent: Friday, November 02, 2001 4:30 AM
> To: ccielab@groupstudy.com
> Subject: Logging to a telnet session.
>
> For the life of me I cannot get messages logged to a telnet session.
>
> I've tried
>
> # logging on
> # logging monitor
>
> I've tried specifying the level of logging eg debugging
>
> I've tried turning off console logging.
>
> The messages are in the buffer log but never get to my telnet session.
> I tried turning off logging to the buffer.
>
> Nothing works. Any ideas ?
>
> Stevie.
>
> Router_C#deb ip ic
> Router_C#ping 15.1.1.5
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 15.1.1.5, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
> Router_C#show logg
> Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
> Console logging: disabled
> Monitor logging: level debugging, 0 messages logged
> Trap logging: level informational, 22 message lines logged
> Buffer logging: level debugging, 147 messages logged
>
> Log Buffer (8192 bytes):
>
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
>
> Then with console logging and monitor logging on
>
> Router_C#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> Router_C(config)#logg con
> Router_C(config)#exi
> Router_C#clear logg
> Clear logging buffer [confirm]
> Router_C#ping 15.1.1.5
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 15.1.1.5, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
> Router_C#show logg
> Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
> Console logging: level debugging, 111 messages logged
> Monitor logging: level debugging, 0 messages logged
> Trap logging: level informational, 23 message lines logged
> Buffer logging: level debugging, 153 messages logged
>
> Log Buffer (8192 bytes):
>
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> ICMP: echo reply rcvd, src 15.1.1.5, dst 15.1.1.3
> Router_C#
>
>
>
>
>
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:01 GMT-3