From: Jerry Toomey (jetoomey@xxxxxxxxx)
Date: Thu Nov 01 2001 - 21:06:50 GMT-3
You want pinouts:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/distrdir/dd4700m/cable.ht
m#xtocid204555
You pin:
RX- to TX- 1 to 5
RX+ to TX+ 6 to 9
TX- to RX- 5 to 1
TX+ to RX+ 9 to 6
In theory it should work. But dual-port might be a problem.
Jerry
> --- Dennis Laganiere <dennisl@advancedbionics.com> wrote:
> > Nope. You need to have a MAU. Happily, MAUs are very inexpensive.
> > Take a
> > look on ebay or contact Brad or Marc at CCBootCamp and they can fix
> you
> > up...
> >
> > --- Dennis
> >
> > -----Original Message-----
> > From: Yigit Zorlu [mailto:yigit@superonline.net]
> > Sent: Thursday, November 01, 2001 2:36 PM
> > To: ccielab@groupstudy.com
> > Subject: Token Ring without MAU ?
> >
> >
> > Hi all,
> >
> > Is it possible to connect TR interface (DB-9) of Cisco 2513 to RJ-45
> > port of
> > Token Ring module in Cat5000 ? If so, can you please tell me the
> > pinouts ?
> >
> > Thanks,
> >
> > Yigit
> =====
> Jerry Toomey of http://www.wansend.com can be reached at 949-439-4685
>
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:01 GMT-3