From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Thu Nov 01 2001 - 18:00:14 GMT-3
as always if the loopback is easily reachable then you should use that.
-----Original Message-----
From: fwells12 [mailto:fwells12@hotmail.com]
Sent: 01 November 2001 20:34
To: ccielab@groupstudy.com
Subject: DLSW peer question
OK, you have a router which has more than one LAN interface it needs DLSW
traffic forwarded from, let's say e0 and t0. It also has a loopback int with
ip ad 172.16.10.1/24. The ip's of the e0 and t0 interfaces are 172.16.20.1/24
and 172.16.30.1/24 respectively. What ip address is the best practice to use
for your dlsw local-peer peer-id statement?
Cheers
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:00 GMT-3