From: Al.Gratz@xxxxxxxxxxxxxxxxxxx
Date: Thu Nov 01 2001 - 14:39:31 GMT-3
The serial 0 interface doesn't need ip router isis, ospf only.
> ----------
> From: McCallum, Robert[SMTP:Robert.McCallum@let-it-be-thus.com]
> Reply To: McCallum, Robert
> Sent: Thursday, November 01, 2001 5:35 AM
> To: 'Bauer, Rick'; ccielab@groupstudy.com
> Subject: RE: ISIS to OSPF redistribution
>
> you do not have ip router isis on your serial interface.
>
> -----Original Message-----
> From: Bauer, Rick [mailto:BAUERR@toysrus.com]
> Sent: 01 November 2001 12:07
> To: ccielab@groupstudy.com
> Subject: RE: ISIS to OSPF redistribution
>
>
> Did you turn on clns routing?
>
> -----Original Message-----
> From: Al.Gratz@usarc-emh2.army.mil [mailto:Al.Gratz@usarc-emh2.army.mil]
> Sent: Wednesday, October 31, 2001 6:00 PM
> To: ccielab@groupstudy.com
> Subject: ISIS to OSPF redistribution
>
>
> Hi,
> my problem is on a router doing ISIS to OSPF redistribution.
> The interface s0 has isis enabled but is no redistributed into ospf at all
> (it is not in the ospf database type 5 LSA either!).
>
> Router R3 config:
>
> interface Serial0
> ip address 172.44.10.3 255.255.255.0
>
> interface Serial1
> ip address 172.44.50.3 255.255.255.0
> ip router isis
> clockrate 64000
>
> router ospf 44
> redistribute isis level-2 subnets
> network 172.44.10.0 0.0.0.255 area 0
> !
> router isis
> net 49.0004.3333.3333.3333.00
>
> Any ideas why ?.
> Thank
> you!
> Al Gratz
This archive was generated by hypermail 2.1.4 : Fri Jun 21 2002 - 06:45:00 GMT-3