From: Khalid Nafie (knafie@xxxxxxxxxx)
Date: Mon Oct 29 2001 - 21:22:18 GMT-3
well I found somthing i was doing wrong all this time, i didn't ever right
this line when i am doing virtual link auth:
area 1 virtual-link 150.10.15.5 authentication message-digest
only this line that iam using
area 1 virtual-link 150.10.15.5 message-digest-key 1 md5 cisco
i added first line and reloaded and it worked.
thanks a lot
-----Original Message-----
From: Brian Hescock [mailto:bhescock@cisco.com]
Sent: Monday, October 29, 2001 3:49 PM
To: Khalid Nafie
Subject: Re: help:Virtual Link Authentication
Khalid,
For a previous e-mail thread about it I believe type 0 is no
authentication and type 2 is MD-5 authentication. Did you apply
authentication to the interface with ip adress 150.10.1.1?
Brian
Khalid Nafie wrote:
>what does this message means :
>0:26:31: OSPF: Send with youngest Key 1
>0:26:34: OSPF: Send with youngest Key 1
>0:26:40: OSPF: Rcv pkt from 150.10.1.1, Serial0.2 : Mismatch Authentication
>typ
>. Input packet specified type 0, we use type 2
>0:26:40: OSPF: Rcv hello from 150.10.10.3 area 1 from Serial0.2 150.10.1.3
>
>
>i am doping a very normal auth bet 3 routers they r all the same, but two
is
>working and the 3rd is givving this message
>althoug all neighboring relation is full
>please advice
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:28 GMT-3