From: Eddie (guitardudez@xxxxxxxxx)
Date: Mon Oct 29 2001 - 18:31:41 GMT-3
Hi all,
In the lab the problem states that I must, "Configure
to allow only SNA traffic, type 04, 08, 0C, to go
through DLSw+."
I see dlsw all-route sna in the answer configs but I
don't think that this is enough to make this work.
The scenario is that there are 2 routers, R1 and R2.
Each has a To0 interface that are not connected. The
routers are joined over frame relay.
I also see this in the configs on R2:
source-bridge ring-group 100
source-bridge transparent 100 20 1 1
dlsw local-peer peer-id 135.4.2.2 promiscuous
dlsw remote-peer 0 tcp 135.4.4.4
dlsw icanreach mac-address 0c00.0000.aaaa mask
ffff.ffff.ffff
dlsw icanreach netbios-name ACCT_AS400
dlsw bridge-group 1
dlsw allroute-sna
I don't think these would do the trick though. Any
help or links on CCO would be welcome.
Thanks in advance,
Regards,
Eddie
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:28 GMT-3