From: Ryaboy Vadim (VRyaboy@xxxxxxxxxx)
Date: Mon Oct 29 2001 - 02:33:37 GMT-3
I've got everything working.
And I have very basic isdn config:
interface BRI0
ip address 212.1.22.98 255.255.255.224
dialer string 8358662
dialer-group 1
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
Config in the answer:
interface BRI0
ip address 212.1.22.34 255.255.255.240
encapsulation ppp
! You should always try to remember to use bandwidth statements on serial
ports (BY THE WAY - WHY?)
bandwidth 128
isdn spid1 0835866101 8358661
isdn spid2 0835866301 8358663
dialer map ip 212.1.22.33 broadcast 8358662
dialer load-threshold 1 either
dialer-group 1
no fair-queue
ppp multilink
no shutdown
Why do I need
1)ppp and
2)dialer load-threshold 1 either
3)bandwidth
4)ppp multilink?
5) DO I need dialer map or I can use dialer string (like in my config)?
Is all that needed or can be omitted?
Thank you.
Vadim.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:27 GMT-3