From: Nigel Taylor (nigel_taylor@xxxxxxxxxxx)
Date: Sun Oct 28 2001 - 02:42:16 GMT-3
Charles,
See Inline.. It would seem that you just had one issue I could
see.. Make that change and watch it fly.. When I was working
through my ISDN studies.. I had a requirement for callback, multi-link, and
snapshot. The great thing is I got it all working.. Then I
really understood the power and flexibility in Dialer Proflies..
Enjoy.
Nigel
----- Original Message -----
From: "Charles Huang" <CharlesNY2000@Yahoo.Com>
To: <ccielab@groupstudy.com>
Sent: Saturday, October 27, 2001 6:21 PM
Subject: PPP callback Server with Dialer Profile
> Hi,
>
> Many of the PPP callback secnarios I found on CCO uses Legacy DDR. So I
tried
> PPP callback using Dialer Profile with no luck. Then I convert it to
Legacy
> DDR and it works. I was wondering if PPP callback can be configured using
> Dialer Profile. Below are part of my configs. Maybe somebody can point
out
> where I did wrong.
>
> Thanks
>
> ! ppp callback client
> !
> hostname r4
> !
> username r2 password 0 ccie
> !
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 44
> isdn switch-type basic-ni
**** ppp callback request **** this should be on the physical interface
> isdn spid1 0835866201 8358662
> isdn spid2 0835866401 8358664
> ppp authentication chap
> !
> interface Dialer3
> ip address 192.168.3.4 255.255.255.0
> encapsulation ppp
> dialer pool 44
> dialer remote-name r2
> dialer idle-timeout 30
> dialer string 8358661
> dialer-group 1
> ppp callback request*********
> ppp authentication chap
> !
> dialer-list 1 protocol ip permit
>
>
>
>
> ! ppp callback server
> !
> hostname r2
> !
> username r4 password 0 ccie
> !
> interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 123
> isdn switch-type basic-ni
***ppp callback accept**** Same here
> isdn spid1 0835866101 8358661
> isdn spid2 0835866301 8358663
> ppp authentication chap
> !
> interface Dialer1
> ip address 192.168.3.2 255.255.255.0
> encapsulation ppp
> dialer pool 123
> dialer remote-name r4
> dialer callback-secure
> dialer idle-timeout 30
> dialer string 8358662 class CALLBACK
> dialer-group 1
> ppp callback accept****
> ppp authentication chap
> !
> map-class dialer CALLBACK
> dialer callback-server username
> !
> dialer-list 1 protocol ip permit
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:26 GMT-3