From: Michael Davis (miked@xxxxxxxxxx)
Date: Fri Oct 26 2001 - 15:52:25 GMT-3
I thought the shutdown was too obvious. ;-)
Mike
#7303
----- Original Message -----
From: "Khalid Nafie" <knafie@ncr.com.kw>
To: "Ahmed Mamoor Amimi" <mamoor@ieee.org>; "Michael Davis"
<miked@netrus.net>; <kevin@btamail.net.cn>; <ccielab@groupstudy.com>
Sent: Friday, October 26, 2001 2:25 PM
Subject: RE: Ping doesn't work on isdn!!!
> There is shutdown under the bri interface
>
> -----Original Message-----
> From: Ahmed Mamoor Amimi [mailto:mamoor@ieee.org]
> Sent: Friday, October 26, 2001 8:23 AM
> To: Michael Davis; kevin@btamail.net.cn; ccielab@groupstudy.com
> Subject: RE: Ping doesn't work on isdn!!!
>
>
> Hi,
> This is the problem that i was also facing. I thought that my link will
> establish without "ppp authentication ___ " but it dont. So u need to
> configure authentication for the routers to ping each other.
>
> I tried everything like static routes on both sides but didnt work.
> In the current condition the router will send the packets to remote router
> but the remote router dont know how to return the packet and keep failing
> the encap.
>
> -Mamoor
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Michael Davis
> Sent: Friday, October 26, 2001 7:34 PM
> To: kevin@btamail.net.cn; ccielab@groupstudy.com
> Subject: Re: Ping doesn't work on isdn!!!
>
>
> You also need a dialer-list on R6 to define interesting traffic.
>
> Mike
> #7303
>
> ----- Original Message -----
> From: <kevin@btamail.net.cn>
> To: <ccielab@groupstudy.com>
> Sent: Friday, October 26, 2001 9:25 AM
> Subject: Ping doesn't work on isdn!!!
>
>
> > Hello all, I config ppp multilink on router with isdn port. isnd
> established successfully. But ping
> > doesn't work. I debug ip packet. The following is shown:
> > 02:06:31: IP: s=10.1.1.6 (local), d=10.1.1.7 (BRI0), len 100, sending
> > 02:06:31: IP: s=10.1.1.6 (local), d=10.1.1.7 (BRI0), len 100,
> encapsulation fail
> > ed
> > Two router configuration for isdn as following:
> > r7#sh run int b0
> > Building configuration...
> > Current configuration:
> > !
> > interface BRI0
> > ip address 10.1.1.7 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > shutdown
> > dialer idle-timeout 300
> > dialer map ip 10.1.1.6 name r6 1111111
> > dialer load-threshold 128 outbound
> > dialer-group 1
> > isdn switch-type basic-net3
> > no peer neighbor-route
> > ppp multilink
> > end
> > r6#sh run int b0
> > Building configuration...
> > Current configuration:
> > !
> > interface BRI0
> > ip address 10.1.1.6 255.255.255.0
> > no ip directed-broadcast
> > encapsulation ppp
> > dialer idle-timeout 300
> > isdn switch-type basic-net3
> > no peer neighbor-route
> > ppp multilink
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:26 GMT-3