From: Albert Lu (albert_ccie@xxxxxxxxx)
Date: Thu Oct 25 2001 - 20:51:15 GMT-3
Hello Group,
I'm working on the redistribution lab, and I got a question on the way the
distribute-list was done. You can take a look at the solution at
http://www.fatkid.com/html/360_redistribution.html
It uses 'distribute-list 1 in' to deny the 204.1.4.0 network from rip.
How I did it was to use 'distribute-list 1 out rip' in the igrp section, in
other-words not letting rip redistribute the network 204.1.4.0 into igrp. I
also applied a 'distribute-list 1 out igrp 10' in the rip section to no let
igrp redistribute the network 204.1.4.0 into rip. Since the network is part
of both routing protocols, they should keep it to themselves and not tell
each other.
However, this doesn't seem to work. I'm getting a routing loop that goes
from R1 to R2 to R4 back to R1.
Albert
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:25 GMT-3