From: Jon Tucker (Jon_Tucker@xxxxxxxxx)
Date: Tue Oct 23 2001 - 00:26:11 GMT-3
rate-limit output access-group 101 20000000 24000 32000 conform-action
set-prec- transmit 5 exceed-action set-prec-transmit 0
rate-limit output access-group 102 10000000 24000 32000 conform-action
set-prec-transmit 5 exceed-action drop
rate-limit output 8000000 16000 24000 conform-action set-prec-transmit 5
exceed-action drop
I grabbed these three examples from CCO. Is there a rule for the
calculation of the normal burst and maximum burst values if we are not told
explicitly what those values should be? In the three examples above, only
the last one had explicit values defined.
These examples were found at
"<http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fq
os_c/fqcprt1/qcfcar.htm>"
Thanks,
- Jon
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3