From: Jerry Toomey (jetoomey@xxxxxxxxx)
Date: Mon Oct 22 2001 - 13:26:53 GMT-3
Jon,
Thanks. This is exactly what I was looking for. Are there any other
issues like having to reboot the router or wait 10 minutes or something
before the actual link comes up? I'm looking at the perspective of your
Router 2.
Jerry
--- Jon Tucker <Jon_Tucker@Jabil.com> wrote:
> Try:
>
> Router 1
> int atm0
> ip address 10.1.1.1 255.255.255.0
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> atm arp-server nsap <NSAP address of the arp server, easier to cut and
> paste this field from Router 2 than type it>
> atm esi-address 111111111111.00 (this lets the atm switch assign you
> the
> 47.<12bytes> front end to your NSAP address, so your NSAP for Router 1
> will
> be 47.<12 bytes assigned>.111111111111.00)
>
> Router 2
> int atm0
> ip address 10.1.1.2 255.255.255.0
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> atm arp-server self
> atm esi-address 222222222222.00
>
> I did this the other day in the lab and it worked for me. I was using a
> LS1010 for the ATM switch.
>
> HTH,
> - Jon
>
> -----Original Message-----
> From: Jerry Toomey [mailto:jetoomey@yahoo.com]
> Sent: Sunday, October 21, 2001 12:46 PM
> To: Raji Mohan; ccielab@groupstudy.com
> Subject: Re: ATM arp-server
>
>
> Raji,
> I'm having similar problems. I've found the following link a little
> helpful:
>
> http://www.cisco.com/warp/public/121/ipoveratm.html
>
> But there is something we're missing. I can't figure it out either.
>
> Jerry
>
>
> --- Raji Mohan <raji@guddi.exodus.net> wrote:
> > Hello
> >
> > I am having problems bringing up the ATM ckt while using ATM
> arp-server
> > and NSAP addresses. My config is as follows :
> > R1(arp client)
> > int atm0/0
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> > atm nsap address 10.0000.0000.0000.0000.0000.0000.1313.1313.1313.13
> > atm arp-server nsap 10.0000.0000.0000.0000.0000.0000.1414.1414.1414.14
> > ip add 10.10.10.13 255.255.255.0
> >
> > R2(arp server)
> > int atm0/0
> > ip add 10.10.10.14 255.255.255.0
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 16 ilmi
> > atm nsap adress 10.0000.0000.0000.0000.0000.0000.1414.1414.1414.14
> > atm arp-server self
> >
> > I cant seem to ping R1 and R2. When I do a 'sh atm arp' on R2 I see
> R1's
> > arp entry but I dont see any arp entries on R1. Also how do we find
> out
> > the nsap addresses that need to be configured on the cleint as well as
> > th
> > e server. Are these fixed nsap addresses or any random address can be
> > given? The condition in the case is to not use esi-address. This thing
> > is
> > driving me craze :(
> >
> > Any help would be appreciated
> > THanks
> > /raji
> =====
> Jerry Toomey of http://www.wansend.com can be reached at 877-690-2578
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3