From: Brant Stevens (branto@xxxxxxxxxxxxx)
Date: Mon Oct 22 2001 - 12:51:31 GMT-3
I would set c1 and c2 as servers... every other switch set as a client...
Watch your index numbers...
----- Original Message -----
From: "Fred" <fd200@bellatlantic.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, October 21, 2001 10:39 PM
Subject: OT:Design Issue
> I have the following issue:
>
> c1, and c2 is core sw, 6509 and sw# is 4000 sw
> (c1)----------(c2)
> \ /
> \ /
> \ /
> \ /
> (sw#)
>
> I have 10 vlan, 21-30, any even vlan # go to c1 and old vlan# go to c2 and
in
> case any uplink to one core fail, I will be able to take an alternate
path.
> My question is how do I go about setting up the VTP domain, c1 and c2 been
the
> server with different VTP domain or c1 been the server and everyone else
been
> the client??? I don't want to manual setting up each 4000 with vlan info,
it
> should learn it by the core sw.
>
> Fred
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3