From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Mon Oct 22 2001 - 10:17:55 GMT-3
Do a show dialer & make sure the dial was due to OSPF.
I had a similar problem with this lab, but IGRP was also running on the router
& causing the bri to dial at 255.255.255.255.
>>> CCIE Candidate <ccie2001ca@yahoo.ca> 10/20/01 03:55PM >>>
Hi Everyone,
I am facing a weird problem in implementing ISDN for
lab 5b of bootcamp. I 've tried "ip ospf
demand-circuit" on both ends and on only one end but
both are not working.
"show ip ospf interface/neig " commands are showing
"hello suppressed" and no dead-time but packets for
destination 224.0.0.5 (OSPF packet) are bringing up
ISDN line again and again.
Have anyone else faced the same problem or have any
idea why OSPF is still bringing up ISDN lines ?
Thanks in advance.
KJ
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3