From: John Neiberger (neiby@xxxxxxxxxx)
Date: Mon Oct 22 2001 - 01:53:57 GMT-3
I was working on Fatkid 401 OSPF lab tonight and I could never get the
virtual link authentication to work correctly. No matter what I did, I
would get errors stating I had a mismatched authentication key. Well, the
key was "cisco" so that's not too hard to type in correctly. Still, I
played with the configs on the two relevant routers and I rebooted them
several times, all to no avail.
I even changed the authentication type to md5 and got the same message.
Very weird. I thought at one point this was an IOS issue because one router
was running 11.2(7) and the other 11.2(25a). I upgraded the first one to
11.2(25a) and I still see the same error.
I peeked at the solution and saw that I had it configured exactly how they
suggested. Then I checked CCO and saw that they suggest the same
configuration.
Do any of you have any tips for configuring virtual link authentication?
This seems to be a pretty simple config and I don't see what I'm missing.
Thanks,
John
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3