From: ohanusi anthony (ohanusi@xxxxxxxxxxxxxxxxx)
Date: Mon Oct 22 2001 - 03:55:11 GMT-3
I had a problem like this before on checking ,the memory and
cpu utilization was very high .what i did was just to run a smaller size
ios.This actually happen when i try configuring DLSW on the system.Try
change your ios
Regards
>try another IOS in order to eliminate a possible SW issue (yes, even though
>it might of been working before without problem!)
>
>jaz
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>routerjocky
>Sent: 21 October 2001 08:05
>To: ccielab@groupstudy.com
>Cc: cisco@groupstudy.com
>Subject: weird termsrv problem
>
>
>I'm having a strange problem with my homelab 2511. Telnet sessions to the
>terminal server just drop unexpectedly. No rhyme or reason to it. A 'clear
>arp' command (from the console) allows me to access the terminal server
>again.
>No errors on the e0 interface are being generated. I've tried changing the
>transceiver, cable, and moving to a different hub port, but none of those
>changes seem to solve the problem. One of the weirdest 'flaky' problems
>that
>I've ever seen, and terribly frustrating because I can't diagnose the
>problem
>from the router. (next step: sniff the network)
>
>Has anyone seen this kind of behavior before?
>
>If so, what was the solution?
>
>If not, what's your best guess at what the problem could be?
>
>thanks in advance
>-e-
>May the route be with you
>Switch if you must, route if you can ;-)
>http://members.home.net/airwrck
Ohanusi Anthony CCNA,CCNP,CCIE Written.
WAN Engineer
Network Solution, A Schlumberger Company
Email : <ohanusi@lagos.sns.slb.com>
Phone : 234-1-2610446 EXT 3230
Fax : 234-1-2621034
Learn to qualify your statement
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3