Re: HELP! Analog modems on aux ports

From: Jay Hennigan (jay@xxxxxxxx)
Date: Sun Oct 21 2001 - 18:19:56 GMT-3

Next message: Kohli, Harbir: "RIF Decoder"
Previous message: Mas Kato: "Re: multicast tip"
Maybe in reply to: Chuck Church: "HELP! Analog modems on aux ports"
Next in thread: Chuck Church: "RE: HELP! Analog modems on aux ports"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

On Sun, 21 Oct 2001, Len Tucker wrote:

> You shouldn't be using rolled cables unless you are using a rolled db25 to
> RJ45 adapter.
> The connection should be straight through from the router to the modem (DTE
> to DCE).

The Cisco rj45<->db25 male labeled "MODEM" is pinned correctly for a rolled
cable.

--
Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
NetLojix Communications, Inc.  -  http://www.netlojix.com/
WestNet:  Connecting you to the planet.  805 884-6323

Next message: Kohli, Harbir: "RIF Decoder"
Previous message: Mas Kato: "Re: multicast tip"
Maybe in reply to: Chuck Church: "HELP! Analog modems on aux ports"
Next in thread: Chuck Church: "RE: HELP! Analog modems on aux ports"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:23 GMT-3