From: Jerry Toomey (jetoomey@xxxxxxxxx)
Date: Sun Oct 21 2001 - 13:45:34 GMT-3
Raji,
I'm having similar problems. I've found the following link a little
helpful:
http://www.cisco.com/warp/public/121/ipoveratm.html
But there is something we're missing. I can't figure it out either.
Jerry
--- Raji Mohan <raji@guddi.exodus.net> wrote:
> Hello
>
> I am having problems bringing up the ATM ckt while using ATM arp-server
> and NSAP addresses. My config is as follows :
> R1(arp client)
> int atm0/0
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> atm nsap address 10.0000.0000.0000.0000.0000.0000.1313.1313.1313.13
> atm arp-server nsap 10.0000.0000.0000.0000.0000.0000.1414.1414.1414.14
> ip add 10.10.10.13 255.255.255.0
>
> R2(arp server)
> int atm0/0
> ip add 10.10.10.14 255.255.255.0
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 16 ilmi
> atm nsap adress 10.0000.0000.0000.0000.0000.0000.1414.1414.1414.14
> atm arp-server self
>
> I cant seem to ping R1 and R2. When I do a 'sh atm arp' on R2 I see R1's
> arp entry but I dont see any arp entries on R1. Also how do we find out
> the nsap addresses that need to be configured on the cleint as well as
> th
> e server. Are these fixed nsap addresses or any random address can be
> given? The condition in the case is to not use esi-address. This thing
> is
> driving me craze :(
>
> Any help would be appreciated
> THanks
> /raji
=====
Jerry Toomey of http://www.wansend.com can be reached at 877-690-2578
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3