From: Ravi (s_ravichandran@xxxxxxxxxxx)
Date: Sun Oct 21 2001 - 10:45:03 GMT-3
Hi,
Your R6 routing table shows both the network as IA entry. To summarize a IA
route, you can use area range command on ABRs. Summary address to summarize
routes learned from another routing process, and to be used on ASBRs. As
your routes are IA routes, summary address will not work.
Regards,
Ravi
----- Original Message -----
From: kym blair <kymblair@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, October 21, 2001 3:23 AM
Subject: OSPF Summary-Address (for redistrib into IGRP)
> Reference: Satterlee & Hutnik's CCIE Lab Practice Kit, Case Study 3, Page
> 284. Redistributing OSPF into IGRP at Router 6 (OSPF ASBR):
>
> Router 6 "show ip route" shows (listing shortened):
>
> C 152.1.0.0/24 is directly connected, Ethernet0 <--IGRP INTERFACE
> O IA 152.1.1.128/25 [110/1254] via 152.1.10.1, 00:47:14, Serial0
> O IA 152.1.2.8/30 [110/1164] via 152.1.10.1, 00:47:14, Serial0
> O IA 152.1.1.0/26 [110/1845] via 152.1.10.1, 00:47:14, Serial0
> O IA 152.1.1.0/25 [110/1836] via 152.1.10.1, 00:47:14, Serial0
> O IA 152.1.2.4/32 [110/1165] via 152.1.10.1, 00:47:15, Serial0
> O IA 152.1.1.80/29 [110/2418] via 152.1.10.1, 00:47:15, Serial0
>
> Want to summarize into 152.1.1.0/24 and 152.1.2.0/24 for redistribution
into
> IGRP:
>
> router ospf 64
> summary-address 152.1.2.0 255.255.255.0
> summary-address 152.1.1.0 255.255.255.0
>
> The routing table does not change, and of course nothing is being
> redistributed into IGRP. What have I done wrong?
>
> Thanks. Kym
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3