From: SWBell (lrlab@xxxxxxxxxx)
Date: Fri Oct 19 2001 - 20:47:48 GMT-3
I agree. I think they wanted us to change the hello timer which by default
sets the Dead timer to hello x 4. The opposite however is not true. you
can change the dead timer all day and not affect the hello.
----- Original Message -----
From: "Khalid Nafie" <knafie@ncr.com.kw>
To: "Ken Snyder" <phizzog@home.com>; <John.K.Feuerherd@WellsFargo.COM>;
<ccielab@groupstudy.com>
Sent: Friday, October 19, 2001 12:44 PM
Subject: RE: CCBootcamp lab 20
> I think this can't be done this way.the question is wrong,isn't it?
>
> -----Original Message-----
> From: Ken Snyder [mailto:phizzog@home.com]
> Sent: Friday, October 19, 2001 9:49 AM
> To: John.K.Feuerherd@WellsFargo.COM; ccielab@groupstudy.com
> Subject: RE: CCBootcamp lab 20
>
>
> Do you have the dead command on R1 and R3?
>
> -Ken
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> John.K.Feuerherd@WellsFargo.COM
> Sent: Thursday, October 18, 2001 6:06 PM
> To: ccielab@groupstudy.com
> Subject: CCBootcamp lab 20
>
> I was working on lab 20 and I came across a problem. In the OSPF
> section they stated that they wanted the Hello interval to be 10
> seconds,
> and I couldn't use the "IP OSPF Net" and "IP OSPF Hello-interval"
> commands
> to accomplish this. Their configs show that you did this by setting the
> Dead-interval to 40. I understand the philosophy of this, but I don't
> think
> it works. I tried it and I got the following results:
>
> interface Serial1.2 multipoint
> ip address 155.10.10.5 255.255.255.240
> ip ospf dead-interval 40
> ip ospf priority 100
> frame-relay map ip 155.10.10.1 102 broadcast
> frame-relay map ip 155.10.10.3 103 broadcast
>
> Serial1.2 is up, line protocol is up
> Internet Address 155.10.10.5/28, Area 1
> Process ID 1, Router ID 155.10.5.5, Network Type NON_BROADCAST, Cost:
> 64
> Transmit Delay is 1 sec, State DR, Priority 100
> Designated Router (ID) 155.10.5.5, Interface address 155.10.10.5
> Backup Designated router (ID) 155.10.3.3, Interface address
> 155.10.10.3
> Timer intervals configured, Hello 30, Dead 40, Wait 40, Retransmit 5
> Hello due in 00:00:29
>
> Am I missing something?
>
> Thanks,
> JF
>
> John Feuerherd
> Wells Fargo Bank
> CCNP CCDP
> 1-505-766-6118 <- Office
> 1-505-301-1966 <- Cell
> John.K.Feuerherd@Wellsfargo.com
> MAC: Q2129-074
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3