From: Daniel Hong (Daniel.Hong@xxxxxxxxxx)
Date: Fri Oct 19 2001 - 00:04:44 GMT-3
Hi Groutp;
I setup a ospf demond circuit , but the link will come up and stay up. I turned
on debug and found that BRI send a ospf multicasting traffic in every 40 secon
ds. This traffic keeped the link up.
When I checked the dialer interface, there is a Pollinterval 40 second. I sear
ched cisco web site. couldn't find any info. Can some one shed me some light.
r6#sh ospf int bri 0/0
BRI0/0 is up, line protocol is up (spoofing)
Internet Address 172.168.65.1/24, Area 0
Process ID 100, Router ID 172.168.255.6, Network Type POINT_TO_POINT, Cost: 1
5
62
Configured as demand circuit.
Run as demand circuit.
DoNotAge LSA allowed.
Transmit Delay is 1 sec, State DOWN,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:01 (using PollInterval of 40)---------------------------
<<<<?????
Daniel Hong
Master In Telecommunications, CCDP & CCNP+Voice
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 22:33:22 GMT-3